Single Faber 12 Litre cylinder with pillar valve and boot MDE Manifold Manufactured from quality heavy-duty brass stampings, with bright chrome plating for lasting looks and durability. MDE Modular Valve Manufactured from quality heavy-duty brass stampings, with bright chrome plating for lasting looks and durability. The easy grip handwheels have stainless steel inserts moulded in for strength and total security of operation. 232 bar sets 7 Litre cylinders - New stock due end of April 2011 - Pre order now for delivery as soon as available  Twin 7 litre 232 bar Now £419 As above with NITROX label Now £419  Twin 10 litre 232 bar Now £445 As above with NITROX label Now £445    Twin 12 litre 232 bar Now £469 As above with NITROX label Now £469 300 bar sets 7 Litre cylinders  Twin 7 litre 300 bar Now £0 Sorry Currently out of stock See Beaver 300 bar Twin sets below As above with NITROX label Now £0 Sorry Currently out of stock See Beaver 300 bar Twin sets below 10 Litre cylinders - New stock due end of April 2011 - Pre order now for delivery as soon as available  Twin 10 litre 300 bar Now £0 Sorry Currently out of stock See Beaver 300 bar Twin sets below As above with NITROX label Now £0 Sorry Currently out of stock See Beaver 300 bar Twin sets below  Twin 12 litre 300 bar Now £0 Sorry Currently out of stock See Beaver 300 bar Twin sets below As above with NITROX label Now £0 Sorry Currently out of stock See Beaver 300 bar Twin sets below

Click for Beaver web site to see savings on recommended prices  Twin 7 litre 232 bar Now £379 As above with NITROX label Now £379  Twin 10 litre 232 bar Now £409 As above with NITROX label Now £409  Twin 12 litre 232 bar Now £439 As above with NITROX label Now £439  Twin 7 litre 300 bar Now £429 As above with NITROX label Now £429  Twin 10 litre 300 bar Now £459 As above with NITROX label Now £459  Twin 12 litre 300 bar Now £489 As above with NITROX label Now £489

Single Faber 12 Litre cylinder with pillar valve and boot San O Sub triple O-Ring manifold San O Sub valve Light weight Steel twin cylinders  includes 2 Faber steel diving cylinders, with two cylinder boots, and  San-O-Sub valves & Triple O ring Isolation manifold (more info >>) , fully welded marine grade stainless bands and bolt kit . Valves are A clamp / DIN M25 convertible  so can be used with either A clamp or DIN regulator sets. Sets with Breathing Air or Nitrox labels same price Note that due to EU regulation air stations should only supply mixes with > 21% O2 for cylinders fitted with M26 valves.  If you want M26 valves please phone to check availability and price. ( Not assembled when Delivered - Given sufficent time they may be assembled for personal collection ) 7 Litre cylinders - New stock due end of April 2011 - Pre order now for delivery as soon as available 2 x 7 litre 232 bar cylinder twin set Now £409 As above with NITROX label Now £409   2 x 10 litre 232 bar cylinder twin set Now £435 As above with NITROX label Now £435 12 Litre cylinders  2 x 12 litre 232 bar cylinder twin set Now £455 As above with NITROX label Now £455

Single Faber 12 Litre cylinder with pillar valve and boot San O Sub isolation manifold and valves Light weight Steel twin cylinders  includes 2 Faber steel diving cylinders, with two cylinder boots, San O Sub 300 bar DIN M25 valves and Isolation manifold  fully welded marine grade stainless bands and bolt kit . Sets with Breathing Air or Nitrox labels same price Note that due to EU regulation air stations should only supply mixes with > 21% O2 for cylinders fitted with M26 valves.  If you want M26 valves please phone to check availability and price. ( Not assembled when Delivered - Given sufficent time they may be assembled for personal collection ) 7 Litre cylinders  2x 7 litre 300 bar Now £445 As above with NITROX label Now £445 10 Litre cylinders - New stock due end of April 2011 - Pre order now for delivery as soon as available 2x 10 litre 300 bar Now £494 As above with NITROX label Now £494 2x 12 litre 300 bar Now £514 As above with NITROX label Now £514

Custom Divers 42mm Stainless Steel  Twinning Bands The stainless steel bands are used to twin two tanks together.  The bottom band of the set has two D rings attached, one either side.  These two D rings give the diver additional points from which to mount equipment.  The bands come in various sizes - we cater for 7/10/12/15 Litre cylinders. Bolt kits are supplied with the bands. Entirely made from stainless steel.

Go-Dive Price £49.99 choose cylinder size:7 litre10/12 litre15 litre

Custom Divers Remote Lead (Slobknob) The remote lead is designed to facilitate access to those hard to reach cylinder valves. This unit offers total flexibility and will allow divers more versatility in kit configuration. The system will fit with most leading manufactures cylinder/manifolds valves. Standard Lead Length: 750mm Outer Housing: BS5118/1 Rubber Hose Centre Shaft: 316 Stainless Steel Wire Layers To fit to MDE PRE 2009,MDE OLD,OMS,S/SUB,BEAVER, SCUBAPRO,BUDDY. Go-Dive Price Now £95 To fit to MDE  2009 JUBILEE Range. Go-Dive Price Now £105

Custom Divers Twin Tank Lift Bar The cylinder lift bar is designed to comfortably lift twinned cylinders on both manifolded and non-manifolded systems.  Fitting the lift bar will prevent stress to the manifold itself and o-ring seats. For manifolded tank configurations the lift bar is positioned just below the manifold and therefore takes the full weight of the cylinders. The fully adjustable system allows fitting to twinned 7ltr to 20ltr tank configurations. All materials are made from marine grade stainless steel (including fittings). The tank collars are made from marine grade aluminium and anodised silver.. Go-Dive Price Now £94.99

Custom Divers Twin Valve Protector Made of stainless steel tubing and available for singles or twins, these valve protectors will protect your first stages from accidental damage in use and during transit to and from the dive site. For twins they additionally provide an acceptable carrying point and hinder untrained people lifting the set by the isolator bar. It is also possible to invert sets using the valve protector as a base. The unique design of the protector enables them to fit any range of twins from 2 x 7 litres to 2 x 20 litres. Fitting is a simple task requiring a spanner and an Allen key. Go-Dive Price Now £98.99

gdz0284 Cylinder Trolley  - Holds 150lbs  - Extends to 40 inches high  - Lightweight but strong design  - Folds completely flat for easy storage  - perfect for twinsets    ( But also useful for 1,001 jobs ! )     £22.99

gdz0605 AP Valves Twin set Kits Allows twin set kits to be fitted to BK1 backpack, Buddy Commandos, Sea Kings, Explorers, Rangers, Pioneers, Sports and Trident, including TD versions. A manifold is not necessary if the diver wants to fit two regulators. £39.99 See More info and Choose size and Buy on-line >>

Twin Cylinder sets with Superior Manifold System -

GO-Dive are the largest retailer of diving cylinders in the UK and for over two years we have been looking for a quality twin set manifold system that ticked all the right boxes for the customer and also met with our high requirements

We don’t just look at the valve today we want to see how they work after being used and abused and this NEW manifold system is in our 30 years of experience the best available to date.

This NEW High specification triple ‘o’ ring barrel type twin set manifold system for twin sets with  tactile hand wheels that are very easy to turn.

Two is often better than one and three is definitely better than two, this new manifold valve system has three ‘o’ rings on each barrel for a better seal  and opposable threads making assembly and disassembly very easy and less likely to cross threading.

We have tested this manifold system in all diving conditions and found that because of the high specification of materials used and the opposable threads there is no need for super thick & expensive bands to support and strengthen the manifold, standard bands work just fine but if you want big bands we will, of course, supply them.

Twin sets are sold as follows:

Sizes & specification available.
All lightweight Faber 02 clean cylinders with valve & isolation manifold system, fully welded marine grade stainless bands & bolt kit. Two boots.
Note: valves are A clamp / DIN convertible so can be used with either Aclamp or DIN regulator sets. Only supplied as M25 valves.  M26 currently not available.
 

Collection from store: Fully assembled with isolation manifold, stainless steel bands/bolt kit and filled, it is best to ring so that we can assemble one to your specification if required.

Mail order:  . You can order on line, the twin set is dispatched unassembled for you to assemble. If you are not comfortable assembling the set yourself then you will need to find someone to assemble it for you. Most dive shops will be very happy to do this for you at an additional cost. Assembly time is approximately 15 minutes.

Not Sure and want to try before you buy ?

We have a number of sets available for hire
One day hire inc fill = £10

or you can try a set for free at our pool sessions on a Monday & Friday evenings.
Come in to shop or Call  01332 755488 to arrange.
 

All offers on this site are subject to availability and E&OE. All Warranties are RTB.
All prices on this web site are for on-line orders. Prices may vary from those in our shop.
All prices include V.A.T,   Post and packing cost  for delivery in UK will be shown when you review your orders.  Proprietor: M.J. Hudson.  V.A.T. Reg. No. 746271621Go-Dive web brochure - terms and conditions of business