Hollis DX300 x Drysuit

LAST ONE AVAILABLE – SIZE SMALL. Rock boots not included

HOLLIS DX 300X DRYSUIT – UNISEX CUT

The DX-300x is a front entry drysuit which has been developed and tested in partnership with technical divers in a variety of demanding conditions and environments to ensure the suit is tough, durable and meets the high standards of both technical and recreational divers. The suit panels have been shaped and cut for superb maneuverability and comfort with extra stretch provided by using a bias cut that provides up to 25% extra flex in the material.

The suit is constructed from a double diamond weave trilaminate material that has a mass of 500g/sqm for extra strength and increased seam integrity. The front entry diagonal zip is a YKK flexible composite zip that is much more flexible than a traditional brass zip and has a flatter profile. The torso also incorporates a telescopic body that prevents restricted upper body by folding and securing a small excess of material beneath an outer flap that is held in place by an elasticated crotch strap.

A Si-Tech silicone neck and wrist seal system is fitted as standard to provide a much more comfortable and flexible seal against the skin. The silicone seals can be replaced in minutes, allowing a spare seal to be fitted between dives on a boat in a wet environment with the need for adhesives.

Buoyancy is controlled via the swiveling Si-Tech inflator valve on the chest and the Si-Tech automatic shoulder dump that can be adjusted to your desired sensitivity. The arms are fitted with a loop of 3M reflective material to help with locating in low light conditions. The DX-300x has two thigh pockets, the right leg is a large zippered pocket whilst the left is a Velcro secured pocket, both of which feature D-rings to secure ancillary equipment.

The knees are coated with a second layer of the suit material to provide abrasion protection in this high wear area. 5mm thick neoprene socks provide plenty of warmth and allow for your choice of boot style to be fitted over the top of the sock. The suit is fitted with internal brace and is supplied with an inflator hose, zippered hood and carry bag.

Features

• Double Diamond weave trilaminate
• Patented BIAS cut
• Telescopic torso
• YKK composite low profile front entry zip
• Fitted with SiTech Neck and wrist system with silicon seals as standard
• One large zipped pocket
• One large velcro pocket
• 3M reflective safety stripe on lower arms
• Double thickness kneepads
• 5mm neoprene socks
• Fitted braces